Manufacturer part #: 2758.1.1M.50
Technical Description
Crossbow Jib System 1100 mm Long x 50 mm
3 ft 7 5/16 in
1.1 m
28.3 oz
0.8 kg
#10 FH in
5 FH mm
21 13/16 in
554 mm
Manufacturer part #: 2758.1.1M.50
Designed for high-performance dinghies, skiffs, and catamarans under six meters (20') the Crossbow self-tacking jib traveler system features a curved track that hinges to align both car and track with the sheet loads for less friction, more load-bearing capacity, and for an ultra-lightweight design.
Machined of 6061-T6 aluminum and Hard Lube-anodized for strength and corrosion resistance this two-piece car body has curved races which evenly distribute the loads on Torlon® ball bearings for low-friction rolling. A Delrin® cap keeps the balls captive when the car is removed from the track. The hardcoat-anodized track has three pivoting attachment points that distribute the load.
Use 50 mm track with a single-line spinnaker system. The track's center strut has a hole for a fair, chafe-free halyard lead.
Designed for high-performance dinghies, skiffs, and catamarans under six meters (20') the Crossbow self-tacking jib traveler system features a curved track that hinges to align both car and track with the sheet loads for less friction, more load-bearing capacity, and for an ultra-lightweight design.
Machined of 6061-T6 aluminum and Hard Lube-anodized for strength and corrosion resistance this two-piece car body has curved races which evenly distribute the loads on Torlon® ball bearings for low-friction rolling. A Delrin® cap keeps the balls captive when the car is removed from the track. The hardcoat-anodized track has three pivoting attachment points that distribute the load.
Use 50 mm track with a single-line spinnaker system. The track's center strut has a hole for a fair, chafe-free halyard lead.