Samson Warpspeed II 7/16"

Manufacturer part #: 440.

The strength member in WarpSpeed II double braid is 100% SK78 fiber. The cover is a flexible 24-strand ployester.

Size Diameter		Weight Per 100 ft	Weight Per 100 m	Strength Average
American	Metric			American	Metric
1/4 in	6 mm	1.6 lb	2.4 kg	5,100 lb	2,300 kg
5/16 in	8 mm	3.0 lb	4.5 kg	6,200 lb	2,800 kg
3/8 in	9 mm	3.8 lb	5.7 kg	9,800 lb	4,400 kg
7/16 in	11 mm	5.8 lb	8.6 kg	14,000 lb	6,400 kg
1/2 in	12 mm	8.2 lb	12.2 kg	15,300 lb	6,900 kg

Please note that the 3/16" diameter is not spliceable due to its parallel core construction.

All strengths are for spliced ropes unless otherwise noted.

10%	20%	30%
0.44%	0.62%	0.79%

After 50 cycles at % of break strength.

A great strength-weight-stretch profile (high strength, low stretch, and very low weight) makes WarpSpeed II® the high-performance racer's choice for double braid ropes. The strength member in this double braid is 100% Dyneema® fiber. The cover is a flexible 24-strand polyester that provides good handling, excellent performance in stoppers and clutches, and enhanced abrasion resistance. The cover can be stripped where desired for greater weight savings.

WarpSpeed II® is beige with tracers and matching cores available in black, red, blue, and green. WarpSpeed® White has an all-white cover with a blue core, or in white with tracers and matching cores of red, blue, and green.

FEATURES

• Enhanced creep properties.
• Excellent abrasion resistance.
• Extremely low stretch.
• Lightweight.
• Very low creep.

resistanceAPPLICATIONS:

• Club Racer. Maximum-Performance Racing. Performance Cruising.
• Halyards.
• Mainsheets.
• Spinnaker Sheets.
• Jib/Genoa Sheets.
• Spinnaker Guys.
• Control Lines.

CONSTRUCTION
Core-dependent double braid.

COVER
24-strand polyester with 3-ends per carrier

CORE
Dyneema® fiber with Samthane coating that matches the tracer color

SPLICE/CLASS
Double Braid Class II

Specific Gravity 1.2