Manufacturer part #:60.2STE
Dimensions
Radial® Electric Winch 24v
4 3/4 in
120 mm
9 5/16 in
236 mm
9 11/16 in
246 mm
4 9/16 in
116 mm
2 3/4 in
69 mm
7 1/8 in
181 mm
9 5/8 in
244 mm
Radial® Electric Winch Kit 24v
4 9/16 in
116 mm
54.5 lb
24.7 kg
4.80
14.40
-
20.30
61.00
-
Total Distance Between Winch and Battery
24 V
5 AWG
16 mm2
3 AWG
25 mm2
2 AWG
35 mm2
0 AVG
50 mm2
Electric System
60.2STE
BRS104/P or BRS102 (*)
BEB1000.12.1
HCP1717
WLC200R.60-70.24 (**)
Kits include:
Winch and a motor, a control box, a circuit breaker, and two BRS104/P switches.
Winch and a motor, a control box, a circuit breaker, and two BRS104/P switches.
Components Included in Kit
60.2STE
BRS104/P or BRS102 (*)
BEB1000.24.1
HCP1717
Powered Radial® winches allow crew to trim any size sail with the push of a button. Winches mount in minutes without removing the drum and can be quickly disassembled and serviced on deck. Seasonal maintenance is painless. Snap-fit socket, washer and screw top lift out as a unit, making reassembly fast and mistake free, with no leftover or misplaced parts to worry about.
Multiple Styles and Finishes
Winches available in aluminum alloy, chrome and in 2- and 3-speed self-tailing. Powered electric or hydraulic.
Easy to convert, install, service
The same drilling pattern is used to mount manual and electric winches of the same size. Other manufacturers must uninstall the existing manual winch, fill the old holes, and drill new holes before converting to electric winch power. Builders can pre-drill a 3.00 inch (7.6 cm) gear shaft hole into the deck to simplify future conversion from manual to electric. Harken offers removable gaskets to seal the holes until upgrades are made.
Patent-pending stud-bolt mounting option allows quick installation without removing the drum.
Socket, washer, and screw-top snap-fit together to simplify maintenance and for mistake-free assembly. Installation manuals and parts lists are available online at www.harken.com.
Integrated Stripper Arm
The strong, one-piece stripper arm completely covers the winch top for a stable platform that prevents fingers and clothing from catching in moving parts-an important safety feature, particularly when operating powered winches. The arm can be adjusted to multiple positions after the winch is mounted, and is shaped to smoothly feed line into and out of the self-tailing jaws.
Manual Override
A Harken® locking handle inserted into an unloaded winch automatically disconnects the motor gear for manual operation.
More Efficient Operation
Harken motors attach to the central drive shaft and drive through the winch gears for a two-speed mechanical advantage-the low-power first gear for fast trimming, the higher-power second gear for fine-tuning loaded sheets. The result is reduced battery drain, allowing more efficient use of the motor.
Reliable Switches
Winches operate with waterproof switches and reliable easy-to-service electric controls.
Winch Load Controller
This electronic system protects Harken® winches from overload by temporarily interrupting the power supply to the winch. The Load Controller comes installed with standard overload settings, but can be customized by request.
Multiple Styles and Finishes
Winches available in aluminum alloy, chrome and in 2- and 3-speed self-tailing. Powered electric or hydraulic.
Easy to convert, install, service
The same drilling pattern is used to mount manual and electric winches of the same size. Other manufacturers must uninstall the existing manual winch, fill the old holes, and drill new holes before converting to electric winch power. Builders can pre-drill a 3.00 inch (7.6 cm) gear shaft hole into the deck to simplify future conversion from manual to electric. Harken offers removable gaskets to seal the holes until upgrades are made.
Patent-pending stud-bolt mounting option allows quick installation without removing the drum.
Socket, washer, and screw-top snap-fit together to simplify maintenance and for mistake-free assembly. Installation manuals and parts lists are available online at www.harken.com.
Integrated Stripper Arm
The strong, one-piece stripper arm completely covers the winch top for a stable platform that prevents fingers and clothing from catching in moving parts-an important safety feature, particularly when operating powered winches. The arm can be adjusted to multiple positions after the winch is mounted, and is shaped to smoothly feed line into and out of the self-tailing jaws.
Manual Override
A Harken® locking handle inserted into an unloaded winch automatically disconnects the motor gear for manual operation.
More Efficient Operation
Harken motors attach to the central drive shaft and drive through the winch gears for a two-speed mechanical advantage-the low-power first gear for fast trimming, the higher-power second gear for fine-tuning loaded sheets. The result is reduced battery drain, allowing more efficient use of the motor.
Reliable Switches
Winches operate with waterproof switches and reliable easy-to-service electric controls.
Winch Load Controller
This electronic system protects Harken® winches from overload by temporarily interrupting the power supply to the winch. The Load Controller comes installed with standard overload settings, but can be customized by request.