Manufacturer part #: 222
Technical Description
Upright
1 1/2 in
38 mm
2 1/4 in
57 mm
2.5 oz
71 g
3/8 in
10 mm
300 lb
136 kg
2000 lb
907 kg
Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications.
Delrin® ball bearings, sheave, and sideplates are UV stabilized with carbon black for maximum protection. Wire Bullet blocks use roller bearings to carry higher loads and feature Hardkote-anodized Teflon® impregnated aluminum sheaves for strength and corrosion resistance. Mast exit blocks with cams used for halyard controls and under boom mainsheets.
Pivoting exit blocks with cams are often used for halyard controls and as "head knockers" for sheeting directly from the boom. The 140 has a high safe working load and is designed for spar-mounted halyards and control lines.
Use for: Outhauls Vangs Barberhaulers Cunninghams Traveler controls Furling line leads Flag halyards
Delrin® ball bearings, sheave, and sideplates are UV stabilized with carbon black for maximum protection. Wire Bullet blocks use roller bearings to carry higher loads and feature Hardkote-anodized Teflon® impregnated aluminum sheaves for strength and corrosion resistance. Mast exit blocks with cams used for halyard controls and under boom mainsheets.
Pivoting exit blocks with cams are often used for halyard controls and as "head knockers" for sheeting directly from the boom. The 140 has a high safe working load and is designed for spar-mounted halyards and control lines.
Use for: