Class-legal Melges 15 bow numbers are required for class-sanctioned events. This item is sold as a set.
Installation Instructions:
-
Orientation: There is a port and starboard number. The slant should always go aft.
-
Prepare the Surface: Ensure the application surface is clean.
-
Mark the Position: Measure and mark 2.5 inches down from the inside of the gunwale and 2.5 inches back from the Melges logo. Mark both the front and back of where you will apply the bow number to ensure it aligns with the gunwale.
-
Apply Water: Lightly mist the hull with water using a spray bottle for best results.
-
Apply the Sticker: Remove the sticker backing and spray the adhesive side with water. Align the bow number with your pencil marks on the hull. Once satisfied with the positioning, use a squeegee to remove any air bubbles.
-
Final Step: Allow the sticker to sit for at least 30 minutes before removing the protective layer.
