Ronstan Small Swivelling Mainsheet Cam Unit

Swivel cleat bases permit easy cleating and releasing from any angle.Height adjustable arm for optimum cleating angle. Twin ball bearing race minimises friction. Adjustable ratchet system prevents the arm from falling to leeward. Twin rows of ball bearings support the cleat arm, and stops are provided to limit rotation to 260° and can be removed to allow full 360° rotation. Fork fittings have a 5mm pin to permit direct attachment to the head post of a block (ie. not using a shackle).

Suits traditional post/shackle head blocks and Dyneema° Link head Orbit Blocks™.

• Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation.
• The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle.
• A switchable ratchet in the base allows the cleat arm to remain in its most recently used position. The ratchet can be turned off for free swivelling.
• Includes small C-Cleat™ cam cleat and fairlead, suitable for line sizes 2-8mm (3/31 - 5/15") dia.
• Suits traditional shackle head blocks and Dyneema® link head Orbit Blocks™.
• Mainsheet systems on dinghies to 4.5m (15ft).
• Swivel cleat bases permit easy cleating and releasing from any angle. Load ratings are for the cleat base assembly and are based on a 120° change in line direction.

• Glass fibre reinforced base and cleat arm.
• Grade 316 stainless steel fixings and block attachment loop.