Manufacturer part #: 02-50
Note: Stainless Steel Cheeks.
Manufacturer part #: 02-50
Lead your halyards aft safely and smoothly with our M-Series Lead blocks. Machined Aluminum cage design follows high-load patterns for a very strong yet light block. Aluminum sheave runs on a Nomex™/Teflon™ bearing and includes Delrin™ ball bearings keeping friction to a minimum.
Lead halyards, topping lift and other control lines aft with ease. Block is mounted to Bisect halyard load angle for maximum tensile strength.
| Features | American | Metric |
|---|---|---|
| Description | Halyard Lift Delrin™ | |
| Length | 1 11/16 in | 43 mm |
| Width | 21/32 in | 17 mm |
| Sheave Ø | 1 1/16 in | 27 mm |
| Max Wire | 3/4 in | 19 mm |
| Jaw Opening | 4 7/8 in | 124 mm |
| Pin Ø | 4 7/8 in | 124 mm |
| C/C Length | 1 in | 25 mm |
| C/C Across | 1 in | 25 mm |
| Fastener (4) | 10 RH | 5 mm |
| Safe Working Load | 900 lb | 410 kg |
| Weight | 2.2 oz | 62 g |
Manufacturer part #: 02-50
Lead your halyards aft safely and smoothly with our M-Series Lead blocks. Machined Aluminum cage design follows high-load patterns for a very strong yet light block. Aluminum sheave runs on a Nomex™/Teflon™ bearing and includes Delrin™ ball bearings keeping friction to a minimum.
Lead halyards, topping lift and other control lines aft with ease. Block is mounted to Bisect halyard load angle for maximum tensile strength.