Manufacturer part #: 97-42
Manufacturer part #: 97-42
These heavy-duty pad eyes are investment cast from high quality Stainless Steel for a high degree of accuracy and strength. The first step in this process involves making a wax part from a master or permanent die. The wax part is then used in a temporary or series of temporary molds.
The actual parts are then cast from the molds without any wear to the permanent die to ensure accurate casting each time. Backing Plates are from high quality stainless steel and are sold separately. Refer to chart below for ordering information.
| Features | American | Metric |
|---|---|---|
| Description | Investment Cast/Square Base | |
| Backing Plate | 97-52 | |
| Eye Width | 3/4 in | 19 mm |
| Eye Height | 3/4 in | 19 mm |
| Eye Stock | 5/16 in | 8 mm |
| Lenght | 3 in | 76 mm |
| Width | 3 in | 76 mm |
| Fasteners | (4) 1/4 in | (4) FH6 mm |
| C/C A | 2 in | 51 mm |
| C/C B | 2 in | 51 mm |
| Safe Working Load | 4000 lb | 1800 k |
| Weight | 11 oz | 312 g |
Manufacturer part #: 97-42
These heavy-duty pad eyes are investment cast from high quality Stainless Steel for a high degree of accuracy and strength. The first step in this process involves making a wax part from a master or permanent die. The wax part is then used in a temporary or series of temporary molds.
The actual parts are then cast from the molds without any wear to the permanent die to ensure accurate casting each time. Backing Plates are from high quality stainless steel and are sold separately. Refer to chart below for ordering information.