The new Seasure RED Performance range is available with 8mm pins and holes and fits directly into the same hole patterns as the standard range, making it easy to upgrade. But what is the key difference other than the striking colour?
Each pintle has 2 grub screws that enables you to remove the pin from the aluminium extrusion. This allows you to check for cracks, bends or fatigue across the whole length of the pin so that you can be confident before going on the water that you won't suffer a failure.
Once you have checked the pin you can either reinstall it or replace the pin. This means that you can change a pintle without having to remove the aluminium component from the back of the boat or rudder which in some cases can be quite difficult and time consuming. If you travel with your boat and attach the lighting board to your transom fittings, then this range is definitely for you. The added vibration caused by the road surface can fatigue a pintle far quicker, so it is best to change the pin more frequently.
- Number of fixing holes: 4 NO.
- Hole size: 5 MM
- Overall width: 75.8 MM
- Overall height: 29 MM
- Hole spacing horizontal: 55.5 MM
- Hole spacing vertical: 16 MM
- Pin length: 42 MM
- Pin diameter: 8 MM
