New England Ropes 3-Strand Nylon
Availability: Price Per Foot
Shipping and Delivery
Enjoy free shipping on qualifying orders of $145 or more delivered within the 48 contiguous United States. Alaska, Hawaii, Puerto Rico, and other U.S. territories are excluded.
Delivery for qualifying free-shipping orders takes 8 to 10 business days.
Free shipping does not apply to:
- Orders containing only clearance items
- Customized special orders made to your detailed requirements
- Sails and boats
- Long tracks, spinnaker poles, whisker poles, and large tubes
- Oversized or heavy items, including items that require less-than-truckload (LTL) freight shipping
Standard Shipping
- UPS and FedEx Ground: Delivery usually takes 2 to 5 business days for in-stock orders.
- USPS: Allow an additional 3 business days beyond the standard shipping time.
- Saturday delivery: UPS and FedEx deliver on Saturdays only for overnight shipments sent on Friday. Additional charges may apply.
Oversized Items and Freight Shipping
Oversized items, such as whisker poles, spinnaker poles, and tracks longer than 8 feet, require freight shipping. The estimated shipping cost is $500, depending on the destination.
For freight deliveries, provide a commercial address, such as the marina, yacht club, or boatyard where your sailboat is located. The recipient must sign for the shipment upon delivery.
International Orders
International customers are responsible for all applicable import duties, fees, and taxes.
New England Ropes 3-Strand Nylon
| Diameter [mm] | Diameter [inch] | Weight [lbs/100'] | Tensile [lbs] |
| 6 | 1/4 | 1.60 | 2,100 |
| 8 | 5/16 | 2.40 | 3,000 |
| 10 | 3/8 | 3.50 | 4,250 |
| 11 | 7/16 | 4.60 | 6,000 |
| 12 | 1/2 | 6.30 | 7,500 |
| 14 | 9/16 | 8.00 | 8,800 |
| 16 | 5/8 | 9.60 | 11,650 |
| 18 | 3/4 | 13.70 | 17,150 |
| 22 | 7/8 | 18.70 | 22,300 |
| 25 | 1 | 24.30 | 27,700 |
| 28 | 1.125 | 31.10 | 35,800 |
Features
- Supple
- High Strength
- Very Good Abrasion Resistance
- Easily Spliced
- Medium Lay
Applications
- Anchor Lines
- Dock Lines
Sunlight/Uv: Nylon has very little degradation from UV, and can be used over long term if inspected regularly.
Chemicals: Nylon will degrade with strong oxidizing agents, mineral acids, and 90% formic acid. Nylon may discolor when exposed to high levels of carbon dioxide.
Heat: Nylon melts at 460°F with progressive strength loss above 300°F.
Dielectrics: Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.
Sheaves: Recommended D/d * ratio is 8:1. (*Sheave diameter to rope diameter)
Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations.
It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc.
The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.
New England Ropes 3-Strand Nylon
| Diameter [mm] | Diameter [inch] | Weight [lbs/100'] | Tensile [lbs] |
| 6 | 1/4 | 1.60 | 2,100 |
| 8 | 5/16 | 2.40 | 3,000 |
| 10 | 3/8 | 3.50 | 4,250 |
| 11 | 7/16 | 4.60 | 6,000 |
| 12 | 1/2 | 6.30 | 7,500 |
| 14 | 9/16 | 8.00 | 8,800 |
| 16 | 5/8 | 9.60 | 11,650 |
| 18 | 3/4 | 13.70 | 17,150 |
| 22 | 7/8 | 18.70 | 22,300 |
| 25 | 1 | 24.30 | 27,700 |
| 28 | 1.125 | 31.10 | 35,800 |
Features
- Supple
- High Strength
- Very Good Abrasion Resistance
- Easily Spliced
- Medium Lay
Applications
- Anchor Lines
- Dock Lines
Sunlight/Uv: Nylon has very little degradation from UV, and can be used over long term if inspected regularly.
Chemicals: Nylon will degrade with strong oxidizing agents, mineral acids, and 90% formic acid. Nylon may discolor when exposed to high levels of carbon dioxide.
Heat: Nylon melts at 460°F with progressive strength loss above 300°F.
Dielectrics: Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.
Sheaves: Recommended D/d * ratio is 8:1. (*Sheave diameter to rope diameter)
Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations.
It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc.
The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

