ILCA Cunningham System PRO
Not available for expedited shipping.
Shipping and Delivery
Enjoy free shipping on qualifying orders of $145 or more delivered within the 48 contiguous United States. Alaska, Hawaii, Puerto Rico, and other U.S. territories are excluded.
Delivery for qualifying free-shipping orders takes 8 to 10 business days.
Free shipping does not apply to:
- Orders containing only clearance items
- Customized special orders made to your detailed requirements
- Sails and boats
- Long tracks, spinnaker poles, whisker poles, and large tubes
- Oversized or heavy items, including items that require less-than-truckload (LTL) freight shipping
Standard Shipping
- UPS and FedEx Ground: Delivery usually takes 2 to 5 business days for in-stock orders.
- USPS: Allow an additional 3 business days beyond the standard shipping time.
- Saturday delivery: UPS and FedEx deliver on Saturdays only for overnight shipments sent on Friday. Additional charges may apply.
Oversized Items and Freight Shipping
Oversized items, such as whisker poles, spinnaker poles, and tracks longer than 8 feet, require freight shipping. The estimated shipping cost is $500, depending on the destination.
For freight deliveries, provide a commercial address, such as the marina, yacht club, or boatyard where your sailboat is located. The recipient must sign for the shipment upon delivery.
International Orders
International customers are responsible for all applicable import duties, fees, and taxes.
ILCA Cunningham System PRO
Upgrade your cunningham to a spliced 8:1 solution! Zim Sailing's Pro Cunningham System comes standard on every Zim Pro ILCA, spliced with Harken Carbo blocks to deliver top-of-the-line performnace. Our Pro Cunningham System includes Kingfisher Eveo Race line and Dyneema, spliced to 18mm and 29mm Harken Carbo blocks.
How to Rig:
- Install lower block around mast section by passing integrated control line and block through the spliced eye.
- Set block to port or starboard side, depending on how you prefer to set up your controls.
- With your mast and sail up, take the Dyneema line (with 29mm and 18mm blocks) and pass the loop through the grommet in the tack of the sail.
- Run the loop down to your vang assembly and connect to the pin at the top of the vang - the two spliced blocks should then be hanging from the sail.
- Next, take the control line (at the base of the mast) and run up to the lower of the two spliced blocks - pass from front to back through the lower or the two blocks.
- Run the control line back down to the 18mm block - pass from back to front through this block.
- Run the control line back up to the upper 29mm block, through the block, and down to the deck block.
- Complete the system by running the control line aft through the deck cleat
Upgrade your cunningham to a spliced 8:1 solution! Zim Sailing's Pro Cunningham System comes standard on every Zim Pro ILCA, spliced with Harken Carbo blocks to deliver top-of-the-line performnace. Our Pro Cunningham System includes Kingfisher Eveo Race line and Dyneema, spliced to 18mm and 29mm Harken Carbo blocks.
How to Rig:
- Install lower block around mast section by passing integrated control line and block through the spliced eye.
- Set block to port or starboard side, depending on how you prefer to set up your controls.
- With your mast and sail up, take the Dyneema line (with 29mm and 18mm blocks) and pass the loop through the grommet in the tack of the sail.
- Run the loop down to your vang assembly and connect to the pin at the top of the vang - the two spliced blocks should then be hanging from the sail.
- Next, take the control line (at the base of the mast) and run up to the lower of the two spliced blocks - pass from front to back through the lower or the two blocks.
- Run the control line back down to the 18mm block - pass from back to front through this block.
- Run the control line back up to the upper 29mm block, through the block, and down to the deck block.
- Complete the system by running the control line aft through the deck cleat
