Allen Brothers 8mm Inboard Clam Shell Batten End
Pickup available at 1830 East Interstate 30
Usually ready in 24 hours
Shipping and Delivery
Free shipping for orders of $98 or more (US Continental)
- Free shipping for orders of $750 or more (International)
- Add 3 business days to the standard shipping time for USPS deliveries.
- UPS and FedEx Ground usually take 2 to 5 business days for in-stock orders.
- UPS and FedEx deliver on Saturdays only for Friday overnight shipments, which may incur an extra
charge. - Orders that apply for free shipping will be delivered between 8 and 10 business days.
- International customers will be responsible for any applicable import duties,fees, or taxes.
- Oversized items like whisker poles, spinnaker poles, and tracks over 7 feet require freight shipping, with an estimated cost of $500 depending on the destination.These orders must be delivered to a
commercial address, such as a marina, yacht club, or boatyard where your sailboat is located.
A recipient must be present to sign for the delivery upon arrival,For more info, Click Here.
Allen Brothers 8mm Inboard Clam Shell Batten End
Allen Brothers 8mm Inboard Clam Shell Batten End
The inboard clam shell batten end is designed to be used on mainsails with a bolt rope.
The batten can be installed at a 45 to 90-degree angle from the mast, ideal for square top or pin head mainsails.
The middle plastic part is typically fitted within the batten pocket. The two side plates then clamp the unit together from the outside.
If fitted tight to the bolt rope it means no bumper is required and allows the sail to run smoothly up and down the mast track.
Made from a UV stable plastic with stainless steel fixing nuts and bolts.
Technical Description
| To Suit Batten Width | 25 mm |
| To Suit Batten Thickness | 8 mm |
| Length Overall | 61.55 mm |
| Width Overall | 58 mm |
| Thickness Overall | 8 mm |
| To Suit Batten Diameter | 8x25 mm |
Allen Brothers 8mm Inboard Clam Shell Batten End
The inboard clam shell batten end is designed to be used on mainsails with a bolt rope.
The batten can be installed at a 45 to 90-degree angle from the mast, ideal for square top or pin head mainsails.
The middle plastic part is typically fitted within the batten pocket. The two side plates then clamp the unit together from the outside.
If fitted tight to the bolt rope it means no bumper is required and allows the sail to run smoothly up and down the mast track.
Made from a UV stable plastic with stainless steel fixing nuts and bolts.
Technical Description
| To Suit Batten Width | 25 mm |
| To Suit Batten Thickness | 8 mm |
| Length Overall | 61.55 mm |
| Width Overall | 58 mm |
| Thickness Overall | 8 mm |
| To Suit Batten Diameter | 8x25 mm |
