Allen Brothers Heavy Duty Vernier Adjuster With De Raker Plate
Availability: Please contact us to confirm availability or discuss item replacements. Please note that certain products may have an estimated arrival time of 30 days and are not available for expedited shipping.
Pickup available at 1830 East Interstate 30
Usually ready in 24 hours
Shipping and Delivery
Free shipping for orders of $98 or more (US Continental)
- Free shipping for orders of $750 or more (International)
- Add 3 business days to the standard shipping time for USPS deliveries.
- UPS and FedEx Ground usually take 2 to 5 business days for in-stock orders.
- UPS and FedEx deliver on Saturdays only for Friday overnight shipments, which may incur an extra
charge. - Orders that apply for free shipping will be delivered between 8 and 10 business days.
- International customers will be responsible for any applicable import duties,fees, or taxes.
- Oversized items like whisker poles, spinnaker poles, and tracks over 7 feet require freight shipping, with an estimated cost of $500 depending on the destination.These orders must be delivered to a
commercial address, such as a marina, yacht club, or boatyard where your sailboat is located.
A recipient must be present to sign for the delivery upon arrival,For more info, Click Here.
Allen Brothers Heavy Duty Vernier Adjuster With De Raker Plate
Allen Brothers Heavy Duty Vernier Adjuster With De Raker Plate
Heavy Duty Vernier Adjuster With De Raker Plate. Allen Vernier Adjusters are made from high quality stainless steel to ensure they are lightweight yet hard wearing. Available in a variety of designs to allow for fine-tune rig adjustment. Also available as de-raker kits with pressed calibration marks, fast pins and captive de-raker plates. Allowing maximum customisation even when you are on the water.
Technical Description
| Adjustment Range | 84 + 43dr mm |
| Height | 22.41 mm |
| Hole Pin Diameter | 5 mm |
| Increments | 4 mm |
| Internal Width | 9.5 mm |
| Length | 111.06 mm |
| Width | 13.7 mm |
| Weight | 77 g |
Allen Brothers Heavy Duty Vernier Adjuster With De Raker Plate
Heavy Duty Vernier Adjuster With De Raker Plate. Allen Vernier Adjusters are made from high quality stainless steel to ensure they are lightweight yet hard wearing. Available in a variety of designs to allow for fine-tune rig adjustment. Also available as de-raker kits with pressed calibration marks, fast pins and captive de-raker plates. Allowing maximum customisation even when you are on the water.
Technical Description
| Adjustment Range | 84 + 43dr mm |
| Height | 22.41 mm |
| Hole Pin Diameter | 5 mm |
| Increments | 4 mm |
| Internal Width | 9.5 mm |
| Length | 111.06 mm |
| Width | 13.7 mm |
| Weight | 77 g |
