Allen Brothers Vang Strut for M24
Pickup available at 1830 East Interstate 30
Usually ready in 24 hours
Shipping and Delivery
Free shipping for orders of $98 or more (US Continental)
- Free shipping for orders of $750 or more (International)
- Add 3 business days to the standard shipping time for USPS deliveries.
- UPS and FedEx Ground usually take 2 to 5 business days for in-stock orders.
- UPS and FedEx deliver on Saturdays only for Friday overnight shipments, which may incur an extra
charge. - Orders that apply for free shipping will be delivered between 8 and 10 business days.
- International customers will be responsible for any applicable import duties,fees, or taxes.
- Oversized items like whisker poles, spinnaker poles, and tracks over 7 feet require freight shipping, with an estimated cost of $500 depending on the destination.These orders must be delivered to a
commercial address, such as a marina, yacht club, or boatyard where your sailboat is located.
A recipient must be present to sign for the delivery upon arrival,For more info, Click Here.
Allen Brothers Vang Strut for M24
Size 2 Vang King for Melges 24
Melges 24 specific ?? This version comes with a pre-set 4mm dynemma primary lines spliced onto an A2034 ?? 30mm Triple Dynamic Block.
Also included is the bottom block an A2037 ?? 30mm triple dynamic block with cam cleat and becket.
The main control line is not included. You can order the required length here.
The Allen Vang King is a telescopic gas strut, designed to be used as a boom support system and combined with a purchase system to create the Vang control.
The Vang King features a plain bearing 37.8mm sheave in the top end of the strut which has been specifically designed to take the load required on yachts up to 26ft.
At the base of the Vang King is our unique attachment post. It has three holes which are reinforced with stainless-steel ferrules. These holes can be used to dead-end rope or shackle blocks too.
The gas strut can be adjusted to reduce the return pressure. Simply remove the screws holding the base plug in position and then remove the plug. Using an Allen key open the grub screw to allow the pressure
to reduce.
