ILCA 7 / Harken Mk2 Vang Lower Unit
Pickup available at 1830 East Interstate 30
Usually ready in 24 hours
Shipping and Delivery
Free shipping for orders of $98 or more (US Continental)
- Free shipping for orders of $750 or more (International)
- Add 3 business days to the standard shipping time for USPS deliveries.
- UPS and FedEx Ground usually take 2 to 5 business days for in-stock orders.
- UPS and FedEx deliver on Saturdays only for Friday overnight shipments, which may incur an extra
charge. - Orders that apply for free shipping will be delivered between 8 and 10 business days.
- International customers will be responsible for any applicable import duties,fees, or taxes.
- Oversized items like whisker poles, spinnaker poles, and tracks over 7 feet require freight shipping, with an estimated cost of $500 depending on the destination.These orders must be delivered to a
commercial address, such as a marina, yacht club, or boatyard where your sailboat is located.
A recipient must be present to sign for the delivery upon arrival,For more info, Click Here.
ILCA 7 / Harken Mk2 Vang Lower Unit
All sheaves are larger diameter for more power and wider for less friction, so the unit will better enable today's increased vang loads. And yet, by rendering it of our proven Carbo Nylon-Reinforced composite material, it is 21% lighter than our current stainless version. The entire unit is a bit more aero frinendly and should not foul the cunningham or outhaul controls.
All sheaves are Harken Fly with stainless bearings running in stainless racings. The last turn before the micro Cammatic is a lightweight stainless ferrule which replaces the fairlead in earlier designs. The cleating angle has been made to match our existing standard but there is a wedge in there for those who would like to experiment. The system's design anticipates that sailors may wish to remove some system purchase to reduce the amount of line in the cockpit. The system enables this and easily converts from 15:1 to 12:1 - and back again.
| Sheave Ø (mm) | 25 mm |
| Sheave Ø (in) | 23/32 in |
| Weight (g) | 179 g |
| Weight (oz) | 6.3 oz |
| Maximum line Ø (mm) | 5 mm |
| Maximum line Ø (in) | 3/16 in |
| Maximum working load (kg) | 453 kg |
| Maximum working load (lb) | 1000 lb |
| Breaking load (kg) | 906 kg |
| Breaking load (lb) | 2000 lb |
