Ronstan Halyard Lock
Shipping and Delivery
Enjoy free shipping on qualifying orders of $145 or more delivered within the 48 contiguous United States. Alaska, Hawaii, Puerto Rico, and other U.S. territories are excluded.
Delivery for qualifying free-shipping orders takes 8 to 10 business days.
Free shipping does not apply to:
- Orders containing only clearance items
- Customized special orders made to your detailed requirements
- Sails and boats
- Long tracks, spinnaker poles, whisker poles, and large tubes
- Oversized or heavy items, including items that require less-than-truckload (LTL) freight shipping
Standard Shipping
- UPS and FedEx Ground: Delivery usually takes 2 to 5 business days for in-stock orders.
- USPS: Allow an additional 3 business days beyond the standard shipping time.
- Saturday delivery: UPS and FedEx deliver on Saturdays only for overnight shipments sent on Friday. Additional charges may apply.
Oversized Items and Freight Shipping
Oversized items, such as whisker poles, spinnaker poles, and tracks longer than 8 feet, require freight shipping. The estimated shipping cost is $500, depending on the destination.
For freight deliveries, provide a commercial address, such as the marina, yacht club, or boatyard where your sailboat is located. The recipient must sign for the shipment upon delivery.
International Orders
International customers are responsible for all applicable import duties, fees, and taxes.
Ronstan Halyard Lock
Ronstan Halyard Lock
Typically used on dinghies as a way to tension wire halyards at a set length. Typically there will be a lightweight tail of synthetic rope used to hoist the sail (e.g. Robline 8-Plait Dinghy), then a wire strop between the top of the sail and the RF191 which takes the load once fully hoisted. A copper ferrule on the wire, swaged in the correct spot, is pulled down slightly beyond the RF191, then eased up the v-shaped groove until the ferrule is locked into the RF191. If reefing is desired you can mount one RF191 down the bottom of the rig, and another further up the mast so that the halyard is held at the correct height for the first reef.
Features:
- 316 Stainless Steel
- Fastener Hole Spacing: 35.9mm hole spacing
- Fastener Hole Diameter: 5mm
- Materials: Grade 316 stainless steel
Ronstan Halyard Lock
Typically used on dinghies as a way to tension wire halyards at a set length. Typically there will be a lightweight tail of synthetic rope used to hoist the sail (e.g. Robline 8-Plait Dinghy), then a wire strop between the top of the sail and the RF191 which takes the load once fully hoisted. A copper ferrule on the wire, swaged in the correct spot, is pulled down slightly beyond the RF191, then eased up the v-shaped groove until the ferrule is locked into the RF191. If reefing is desired you can mount one RF191 down the bottom of the rig, and another further up the mast so that the halyard is held at the correct height for the first reef.
Features:
- 316 Stainless Steel
- Fastener Hole Spacing: 35.9mm hole spacing
- Fastener Hole Diameter: 5mm
- Materials: Grade 316 stainless steel
